Brian James 475-6463

Tyre pressures and wheel nut / bolt torque

Tyre specification

Tyre size195/60 R12

Fitment details

  • Official 2022 Connect specification for product code 475-6463.
  • Pressure applies only to the 195/60 R12 tyre matched to Brian James Trailers' official chart.
  • The 2022 specification does not identify the wheel fixing material or thread.
  • Confirm the fitted wheel before selecting a torque.
  • M16 remains withheld pending manufacturer confirmation.
  • Published weights are approximate and exclude optional extras.
Warning — Check wheel fixing

Choose the setting for the confirmed wheel fixing.

Socket size alone does not identify the thread.

Alloy wheels are not covered by these settings.

Click here to read more about tyre load ratings →

Tyre pressure placard

Brian James 475-6463
UNLADEN WEIGHT925 kgMAX GROSS WEIGHT3,500 kg
Brian James Connect trailer

Official Brian James Trailers Connect range illustration; optional equipment may be shown and the exact 475-6463 configuration may vary.

Tyre sizekPaPSIbar
195/60 R12650906.5
Warning — Check tyre pressure rating

Please ensure the maximum pressure marked on your tyre sidewall is equal to or higher than the pressure listed here.

A tyre of the same size with a lower pressure rating may have been fitted by mistake.

Never exceed the maximum pressure marked on the tyre.

Is your tyre load rating high enough?

EXAMPLE TYRE SIDEWALL MARKING 195/60R12C104/102N Single-wheel load indexDual-wheel load index104 = 900 kg per tyre102 = 850 kg per tyreOne wheel at eachend of the axleTwo wheels side by sideat each end of the axleTwin axles do not mean dual wheels. N is the speed symbol.

Find the load index beside the tyre size. For example, 104 = 900 kg per tyre. For normal trailer wheels, use the first number in 104/102N. The second is for tyres mounted side by side on one hub, not a trailer with two axles. N is the speed symbol.

Open the tyre load rating conversion chart →

Capacity per tyre × number of road tyres = combined tyre capacity. Do not count the spare or jockey wheel.

Example: four tyres rated 104 give 900 × 4 = 3,600 kg, which exceeds a 3,500 kg trailer maximum gross weight by 100 kg. This is a total-capacity comparison only.

Check your tyre capacity

Enter all three values to compare capacity.

Check every axle too: its tyres must support its plated maximum axle weight, and no individual tyre may be overloaded. This calculator assumes all tyres have the same load index and are mounted singly. It does not confirm fitment or set tyre pressure. Keep the trailer manufacturer’s required load and speed ratings, use the specified cold pressure and check the actual loaded axle weights.

Cold tyre pressure

90 PSI / 6.5 bar / 650 kPa

A separate unloaded or fully laden pressure has not been confirmed for this entry.

Wheel nut / bolt torque

M12 wheel nuts /120 Nm
Alloy wheels130 Nm
M16 wheel nuts /—

Use the setting only for the wheel and fixing specification described above.

Frequently asked questions

What is the tyre pressure for the Brian James 475-6463 connect flatbed trailer with 195/60 R12 tyres?

The tyre pressure for the Brian James 475-6463 connect flatbed trailer with 195/60 R12 tyres is 90 PSI (6.5 bar / 650 kPa), measured cold. This applies to the 195/60 R12 tyre. Confirm the tyre sidewall marking before use.

What is the wheel nut or bolt torque for the Brian James 475-6463 connect flatbed trailer?

The wheel nut or bolt torque for the Brian James 475-6463 connect flatbed trailer depends on the fitted fixing. M12 wheel nuts / bolts: 120 Nm; Alloy wheels: 130 Nm; M16 wheel nuts / bolts: not yet confirmed. Confirm whether the fitted wheel is steel or alloy and identify the fixing thread. Use 120 Nm only for confirmed M12 steel-wheel fixings and 130 Nm only for confirmed alloy wheels. M16 is withheld pending manufacturer confirmation.

Other Brian James trailer models →