Brian James 526-3116-27-2-12
Tyre pressures and wheel nut / bolt torque
Tyre specification
Fitment details
- Official 1 July 2022 Tipper specification: 526-3116-27-2-12, 2700 kg gross, 870 kg unladen, 3.10 m × 1.60 m load bed, 4.40 m × 1.71 m overall, 2 axles.
- The tyre-pressure chart gives 90 PSI / 6.5 bar / 650 kPa.
- The brochure does not map this model to a wheel fixing.
- Identify the fitted hardware before selecting a torque; M16 remains withheld pending direct manufacturer confirmation.
- Weights are approximate and exclude options.
Choose the setting for the confirmed wheel fixing.
Socket size alone does not identify the thread.
Alloy wheels are not covered by these settings.
Tyre pressure placard

Official Brian James 2022 Tipper range illustration; equipment and finishes may vary.
| Tyre size | kPa | PSI | bar |
|---|---|---|---|
| 195/60R12 | 650 | 90 | 6.5 |
Please ensure the maximum pressure marked on your tyre sidewall is equal to or higher than the pressure listed here.
A tyre of the same size with a lower pressure rating may have been fitted by mistake.
Never exceed the maximum pressure marked on the tyre.
Is your tyre load rating high enough?
Find the load index beside the tyre size. For example, 104 = 900 kg per tyre. For normal trailer wheels, use the first number in 104/102N. The second is for tyres mounted side by side on one hub, not a trailer with two axles. N is the speed symbol.
Open the tyre load rating conversion chart →
Capacity per tyre × number of road tyres = combined tyre capacity. Do not count the spare or jockey wheel.
Example: four tyres rated 104 give 900 × 4 = 3,600 kg, which exceeds a 3,500 kg trailer maximum gross weight by 100 kg. This is a total-capacity comparison only.
Check your tyre capacity
Enter all three values to compare capacity.
Check every axle too: its tyres must support its plated maximum axle weight, and no individual tyre may be overloaded. This calculator assumes all tyres have the same load index and are mounted singly. It does not confirm fitment or set tyre pressure. Keep the trailer manufacturer’s required load and speed ratings, use the specified cold pressure and check the actual loaded axle weights.
Cold tyre pressure
90 PSI / 6.5 bar / 650 kPa
A separate unloaded or fully laden pressure has not been confirmed for this entry.
Wheel nut / bolt torque
Use the setting only for the wheel and fixing specification described above.
Frequently asked questions
What is the tyre pressure for the Brian James 526-3116-27-2-12 tipper trailer with 195/60R12 tyres?
The tyre pressure for the Brian James 526-3116-27-2-12 tipper trailer with 195/60R12 tyres is 90 PSI (6.5 bar / 650 kPa), measured cold. This applies to the 195/60R12 configuration listed for 526-3116-27-2-12; exact chart row.
What is the wheel nut or bolt torque for the Brian James 526-3116-27-2-12 tipper trailer?
The wheel nut or bolt torque for the Brian James 526-3116-27-2-12 tipper trailer depends on the fitted fixing. M12 HT steel-wheel screws / nuts / bolts: 120 Nm; M16 steel-wheel fixing: not yet confirmed; Alloy wheel: 130 Nm. Use 120 Nm only after identifying an M12 steel-wheel fixing, or 130 Nm after identifying an alloy wheel. M16 is withheld pending direct manufacturer confirmation.