Ifor Williams GH1054 Standard
Tyre pressures and wheel nut / bolt torque
Tyre specification
Fitment details
- Pressure applies to the manufacturer-listed 185/70R13C 106/104N or 106/104J tyre.
- The official P0851 five-stud steel wheel assembly is mapped to GH1054; its M14 bolts (normally a 19 mm socket) use 110 Nm.
- Internal bed: 3.04 m × 1.62 m; overall: approximately 5.00 m × 2.09 m.
Tyre pressure placard
Ifor Williams GH1054 Standard trailer visual reference.
| Tyre size | kPa | PSI | bar |
|---|---|---|---|
| 185/70R13C | 600 | 87 | 6.0 |
Please ensure the maximum pressure marked on your tyre sidewall is equal to or higher than the pressure listed here.
A tyre of the same size with a lower pressure rating may have been fitted by mistake.
Never exceed the maximum pressure marked on the tyre.
Is your tyre load rating high enough?
Find the load index beside the tyre size. For example, 104 = 900 kg per tyre. For normal trailer wheels, use the first number in 104/102N. The second is for tyres mounted side by side on one hub, not a trailer with two axles. N is the speed symbol.
Open the tyre load rating conversion chart →
Capacity per tyre × number of road tyres = combined tyre capacity. Do not count the spare or jockey wheel.
Example: four tyres rated 104 give 900 × 4 = 3,600 kg, which exceeds a 3,500 kg trailer maximum gross weight by 100 kg. This is a total-capacity comparison only.
Check your tyre capacity
Enter all three values to compare capacity.
Check every axle too: its tyres must support its plated maximum axle weight, and no individual tyre may be overloaded. This calculator assumes all tyres have the same load index and are mounted singly. It does not confirm fitment or set tyre pressure. Keep the trailer manufacturer’s required load and speed ratings, use the specified cold pressure and check the actual loaded axle weights.
Cold tyre pressure
87 PSI / 6.0 bar / 600 kPa
A separate unloaded or fully laden pressure has not been confirmed for this entry.
Wheel nut / bolt torque
Use the setting only for the wheel and fixing specification described above.
Frequently asked questions
What is the tyre pressure for the Ifor Williams GH1054 Standard plant trailer with 185/70R13C tyres?
The tyre pressure for the Ifor Williams GH1054 Standard plant trailer with 185/70R13C tyres is 87 PSI (6.0 bar / 600 kPa), measured cold. This applies to the manufacturer-listed 185/70R13C 106/104 tyre.
What is the wheel nut or bolt torque for the Ifor Williams GH1054 Standard plant trailer?
The wheel nut or bolt torque for the Ifor Williams GH1054 Standard plant trailer is 110 Nm. This applies to the P0851 five-stud steel wheel with M14 bolts (normally a 19 mm socket).