Ifor Williams LT146/B 2,000 kg
Tyre pressures and wheel nut / bolt torque
Tyre specification
Fitment details
- For the LT-range P0833 145/70R13 84N FRT wheel assembly, rated at 54 PSI / 3.7 bar.
- Do not substitute the 47 PSI setting for the lower-rated 78N assembly.
- 88 Nm applies to the four-bolt steel wheel with M12 bolts (normally a 19 mm socket).
- Use clean, dry threads and seating surfaces.
- Optional alloy wheels are not covered.
- Internal bed: 4.24 m long x 1.9 m wide; overall: 5.6 m long x 2.05 m wide.
- Weights depend on the production specification and fitted equipment; check the trailer plate and supplied documents.
- For the P08891 195/60R12C 104/102N assembly on a 6J x 12 steel rim.
- 110 Nm applies to the five-bolt steel wheel with M14 x 1.5 bolts (normally a 19 mm socket).
- Use clean, dry threads and seating surfaces.
- Optional alloy wheels are not covered.
- Internal bed: 4.24 m long x 1.9 m wide; overall: 5.6 m long x 2.05 m wide.
- Weights depend on the production specification and fitted equipment; check the trailer plate and supplied documents.
Choose the setting for the confirmed wheel fixing.
Socket size alone does not identify the thread.
Alloy wheels are not covered by these settings.
Tyre pressure placard
Official Ifor Williams beavertail family photograph; bed dimensions, wheels and equipment vary by model.
| Tyre size | kPa | PSI | bar |
|---|---|---|---|
| 145/70R13C | 370 | 54 | 3.7 |
Please ensure the maximum pressure marked on your tyre sidewall is equal to or higher than the pressure listed here.
A tyre of the same size with a lower pressure rating may have been fitted by mistake.
Never exceed the maximum pressure marked on the tyre.
Is your tyre load rating high enough?
Find the load index beside the tyre size. For example, 104 = 900 kg per tyre. For normal trailer wheels, use the first number in 104/102N. The second is for tyres mounted side by side on one hub, not a trailer with two axles. N is the speed symbol.
Open the tyre load rating conversion chart →
Capacity per tyre × number of road tyres = combined tyre capacity. Do not count the spare or jockey wheel.
Example: four tyres rated 104 give 900 × 4 = 3,600 kg, which exceeds a 3,500 kg trailer maximum gross weight by 100 kg. This is a total-capacity comparison only.
Check your tyre capacity
Enter all three values to compare capacity.
Check every axle too: its tyres must support its plated maximum axle weight, and no individual tyre may be overloaded. This calculator assumes all tyres have the same load index and are mounted singly. It does not confirm fitment or set tyre pressure. Keep the trailer manufacturer’s required load and speed ratings, use the specified cold pressure and check the actual loaded axle weights.
Cold tyre pressure
54 PSI / 3.7 bar / 370 kPa
A separate unloaded or fully laden pressure has not been confirmed for this entry.
Wheel nut / bolt torque
Use the setting only for the wheel and fixing specification described above.
Frequently asked questions
What is the tyre pressure for the Ifor Williams LT146/B 2,000 kg trailer with 145/70R13C tyres?
The tyre pressure for the Ifor Williams LT146/B 2,000 kg trailer with 145/70R13C tyres is 54 PSI (3.7 bar / 370 kPa), measured cold. This applies to the LT-range P0833 145/70R13 84N FRT assembly. It does not apply to the lower-rated 78N assembly.
What is the wheel nut or bolt torque for the Ifor Williams LT146/B 2,000 kg trailer?
The wheel nut or bolt torque for the Ifor Williams LT146/B 2,000 kg trailer depends on the fitted fixing. M12 · 19 mm: 88 Nm. Use the setting for the exact model and matching steel-wheel fixing shown above. Optional alloy wheels are not covered.