Indespension FTL35146
Tyre pressures and wheel nut / bolt torque
Tyre specification
Fitment details
- Applies to the WT081 5 x M16 on 165.1 mm PCD wheel assembly.
- The current official category and flatbed specification sheet do not publish overall dimensions; the field is intentionally null.
- WT081 is the exact matching official assembly: 195/50R13C 104N, 5 x M16 on 165.1 mm PCD, 114.5 mm centre bore.
- Internal dimensions: length 4.22 m × width 1.92 m.
Tyre pressure placard

Official Indespension FTL35146 photograph; equipment and options may vary.
| Tyre size | kPa | PSI | bar |
|---|---|---|---|
| 195/50R13C 104N | 655 | 95 | 6.55 |
Please ensure the maximum pressure marked on your tyre sidewall is equal to or higher than the pressure listed here.
A tyre of the same size with a lower pressure rating may have been fitted by mistake.
Never exceed the maximum pressure marked on the tyre.
Is your tyre load rating high enough?
Find the load index beside the tyre size. For example, 104 = 900 kg per tyre. For normal trailer wheels, use the first number in 104/102N. The second is for tyres mounted side by side on one hub, not a trailer with two axles. N is the speed symbol.
Open the tyre load rating conversion chart →
Capacity per tyre × number of road tyres = combined tyre capacity. Do not count the spare or jockey wheel.
Example: four tyres rated 104 give 900 × 4 = 3,600 kg, which exceeds a 3,500 kg trailer maximum gross weight by 100 kg. This is a total-capacity comparison only.
Check your tyre capacity
Enter all three values to compare capacity.
Check every axle too: its tyres must support its plated maximum axle weight, and no individual tyre may be overloaded. This calculator assumes all tyres have the same load index and are mounted singly. It does not confirm fitment or set tyre pressure. Keep the trailer manufacturer’s required load and speed ratings, use the specified cold pressure and check the actual loaded axle weights.
Cold tyre pressure
95 PSI / 6.55 bar / 655 kPa
A separate unloaded or fully laden pressure has not been confirmed for this entry.
Wheel nut / bolt torque
Use the setting only for the wheel and fixing specification described above.
Frequently asked questions
What is the tyre pressure for the Indespension FTL35146 flatbed trailer with 195/50R13C 104N tyres?
The tyre pressure for the Indespension FTL35146 flatbed trailer with 195/50R13C 104N tyres is 95 PSI (6.55 bar / 655 kPa), measured cold. This applies to the specified WT081 195/50R13C 104N wheel assembly. Confirm the tyre marking and fitted wheel attachment before use.
What is the wheel nut or bolt torque for the Indespension FTL35146 flatbed trailer?
The wheel nut or bolt torque for the Indespension FTL35146 flatbed trailer is 115 Nm. This applies to the documented wheel nuts; Indespension specifies 115 Nm for this attachment.