Indespension SRC7C

Tyre pressures and wheel nut / bolt torque

Tyre specification

Tyre size165R13C 96N

Fitment details

  • Applies to the WT058 4 x M12 wheel assembly.
  • Indespension calls the torque category “Wheel Stud Bolts”; confirm the fitted attachment before service.
  • The cited official sources do not publish fixed overall trailer dimensions; the field is intentionally null.

Tyre pressure placard

Indespension SRC7C
UNLADEN WEIGHT700 kgMAX GROSS WEIGHT2,600 kg
Indespension SRC7C trailer

Official Indespension SRC7C photograph; equipment and options may vary.

Tyre sizekPaPSIbar
165R13C 96N448654.48
Torque applies to the wheel assembly specified in Fitment details.
Warning — Check tyre pressure rating

Please ensure the maximum pressure marked on your tyre sidewall is equal to or higher than the pressure listed here.

A tyre of the same size with a lower pressure rating may have been fitted by mistake.

Never exceed the maximum pressure marked on the tyre.

Is your tyre load rating high enough?

EXAMPLE TYRE SIDEWALL MARKING 195/60R12C104/102N Single-wheel load indexDual-wheel load index104 = 900 kg per tyre102 = 850 kg per tyreOne wheel at eachend of the axleTwo wheels side by sideat each end of the axleTwin axles do not mean dual wheels. N is the speed symbol.

Find the load index beside the tyre size. For example, 104 = 900 kg per tyre. For normal trailer wheels, use the first number in 104/102N. The second is for tyres mounted side by side on one hub, not a trailer with two axles. N is the speed symbol.

Open the tyre load rating conversion chart →

Capacity per tyre × number of road tyres = combined tyre capacity. Do not count the spare or jockey wheel.

Example: four tyres rated 104 give 900 × 4 = 3,600 kg, which exceeds a 3,500 kg trailer maximum gross weight by 100 kg. This is a total-capacity comparison only.

Check your tyre capacity

Enter all three values to compare capacity.

Check every axle too: its tyres must support its plated maximum axle weight, and no individual tyre may be overloaded. This calculator assumes all tyres have the same load index and are mounted singly. It does not confirm fitment or set tyre pressure. Keep the trailer manufacturer’s required load and speed ratings, use the specified cold pressure and check the actual loaded axle weights.

Cold tyre pressure

65 PSI / 4.48 bar / 448 kPa

A separate unloaded or fully laden pressure has not been confirmed for this entry.

Wheel nut / bolt torque

110 Nm

Use the setting only for the wheel and fixing specification described above.

Frequently asked questions

What is the tyre pressure for the Indespension SRC7C marine trailer with 165R13C 96N tyres?

The tyre pressure for the Indespension SRC7C marine trailer with 165R13C 96N tyres is 65 PSI (4.48 bar / 448 kPa), measured cold. This applies to the specified WT058 165R13C 96N wheel assembly. Confirm the tyre marking and fitted wheel attachment before use.

What is the wheel nut or bolt torque for the Indespension SRC7C marine trailer?

The wheel nut or bolt torque for the Indespension SRC7C marine trailer is 110 Nm. This applies to the documented M12 wheel stud bolt; Indespension specifies 110 Nm for this attachment.

Other Indespension trailer models →