Indespension TPR27085
Tyre pressures and wheel nut / bolt torque
Tyre specification
Fitment details
- Applies to the WT081 195/50R13C 104N wheel assembly with five M16 wheel nuts.
- The manufacturer parts catalogue specifies 95 PSI for WT081, while the M16 wheel-nut torque is withheld pending confirmation.
- Bar and kPa are rounded pressure conversions.
- Maximum gross weight is 2700 kg.
- Unladen weight of 665 kg is the manufacturer trailer-catalogue specification; current production may differ.
- Check the trailer plate and supplied documents.
Tyre pressure placard
Indespension TPR27085 trailer visual reference
| Tyre size | kPa | PSI | bar |
|---|---|---|---|
| 195/50R13C (WT081) | 655 | 95 | 6.55 |
Please ensure the maximum pressure marked on your tyre sidewall is equal to or higher than the pressure listed here.
A tyre of the same size with a lower pressure rating may have been fitted by mistake.
Never exceed the maximum pressure marked on the tyre.
Is your tyre load rating high enough?
Find the load index beside the tyre size. For example, 104 = 900 kg per tyre. For normal trailer wheels, use the first number in 104/102N. The second is for tyres mounted side by side on one hub, not a trailer with two axles. N is the speed symbol.
Open the tyre load rating conversion chart →
Capacity per tyre × number of road tyres = combined tyre capacity. Do not count the spare or jockey wheel.
Example: four tyres rated 104 give 900 × 4 = 3,600 kg, which exceeds a 3,500 kg trailer maximum gross weight by 100 kg. This is a total-capacity comparison only.
Check your tyre capacity
Enter all three values to compare capacity.
Check every axle too: its tyres must support its plated maximum axle weight, and no individual tyre may be overloaded. This calculator assumes all tyres have the same load index and are mounted singly. It does not confirm fitment or set tyre pressure. Keep the trailer manufacturer’s required load and speed ratings, use the specified cold pressure and check the actual loaded axle weights.
Cold tyre pressure
95 PSI / 6.55 bar / 655 kPa
A separate unloaded or fully laden pressure has not been confirmed for this entry.
Wheel nut / bolt torque
Use the setting only for the wheel and fixing specification described above.
Frequently asked questions
What is the tyre pressure for the Indespension TPR27085 tipper trailer with 195/50R13C (WT081) tyres?
The tyre pressure for the Indespension TPR27085 tipper trailer with 195/50R13C (WT081) tyres is 95 PSI (6.55 bar / 655 kPa), measured cold. This applies specifically to the WT081 195/50R13C 104N wheel assembly. The M16 wheel-nut torque remains unconfirmed.
What is the wheel nut or bolt torque for the Indespension TPR27085 tipper trailer?
The wheel nut or bolt torque for the Indespension TPR27085 tipper trailer has not yet been confirmed. Obtain the correct value for its wheel and fixing specification before tightening. Use only the matching wheel and fixing specification described above.