Audi A1 2010 to 2019
TPMS Reset / Tyre Pressure Monitor
Audi A1 Reset Tyre Monitor / Calibration
Storing Tyre Pressures
Make sure all four tyres are inflated to the correct pressures for the vehicle load.
Switch the ignition on.
Select: CAR > Car systems > Servicing & checks > Tyre pressure monitoring > Store tyre pressures > Yes, store now.
Store the pressures again whenever tyre pressures are adjusted or a tyre or wheel is changed.
Manufacturer Year: 10 - 19 · Tyre Size: 185/60R15
Before resetting the tyre pressure monitor: Audi A1
Check the tyres first
A reset does not repair a puncture or restore lost air. Check all tyres and set the correct cold pressures before following the reset instructions. If a tyre repeatedly loses pressure, have the cause investigated rather than repeatedly clearing the warning.
Follow the correct system procedure
Vehicles use different monitoring systems. Some store a reference after adjustment, while others use pressure sensors and may need a relearn procedure. Follow the instructions for this vehicle; a menu sequence from another model may not apply.
If the warning returns
Recheck the pressures and inspect for damage. A persistent or flashing warning can indicate a system fault as well as a pressure issue; use the vehicle handbook to identify it. TPMS does not replace routine manual pressure checks.