Bmw X1

Bmw X1 Tyre Size Converter - Quick Results

Tyre Size Converter - Quick Results

Tyre Size Converter - Quick Results

Using one of the standard fitment sizes listed for the Bmw X1, we have selected 255/35R19 to get you started. If your vehicle has a different size, enter the size shown on your tyre sidewall below to compare alternatives, wheel sizes and circumference differences.

Enter your tyre size to see the closest diameter match for each available rim size. Same or larger rims, with no narrower tyres.

For example: 205/55R16 or 2055516

Closest tyre size matches

3 closest recorded alternatives for 255/35R19, within ±3% circumference. Same or larger rims; tyre width 255 mm or wider.

19-inch rim

295/30R19✓ -0.23%Width +40 mmCompare

20-inch rim

255/30R20✓ -0.02%Same tyre widthCompare

21-inch rim

295/25R21✓ +3.00%Width +40 mmCompare

Bmw X1 tyre size conversion explained

For your X1, changing from your selected 255/35R19 tyre on 19-inch wheels to 255/30R20 on 20-inch wheels gives a circumference decrease of 0.02%. Nominal tyre width stays the same at 255 mm. With 255/30R20, indicated speeds of 30 and 60 mph correspond to approximately 30.0 and 60.0 mph respectively, assuming the speedometer was accurate with your selected original size.

If you want to increase wheel size further on your X1, another option to compare is 295/25R21 on 21-inch rims, up from your selected 19-inch rims. Circumference increases by 3.00%, while nominal tyre width increases by 40 mm, from 255 to 295 mm. With 295/25R21, indicated speeds of 30 and 60 mph correspond to approximately 30.9 and 61.8 mph respectively, assuming the speedometer was accurate with your selected original size.

Choosing a wheel size increase for your Bmw X1

Standard and original equipment sizes

Check the standard or original equipment tyre and wheel sizes approved for your exact engine and trim. A size recorded against this model may belong to another version. A genuine manufacturer wheel option still needs to match your vehicle; these calculated alternatives are close size matches, not confirmation of manufacturer approval.

Speedometer variation and effective gearing

Keeping circumference close to your original tyre limits changes to speedometer and distance readings and effective gearing. A larger circumference makes gearing taller and increases road speed at the same wheel speed; a smaller circumference makes gearing shorter. The gearbox ratios themselves do not change. The estimates above assume the speedometer was accurate with your selected original tyre; existing speedometer error and actual rolling circumference can change the result. The ±3% filter is this converter’s comparison threshold, not a manufacturer approval or a guarantee of fitment.

More wheel, less sidewall

A larger wheel paired with a lower-profile tyre can give your X1 a sleeker, sportier appearance while keeping overall diameter close to the original. A shorter sidewall can also mean a firmer ride and less cushioning over potholes.

Tyre width, offset and full-lock clearance

Keep width increases modest and check clearance around the suspension and inner wheel arches at full steering lock and through suspension travel. Tyre width, wheel width and offset all affect whether a wheel fits without rubbing. Nominal tyre width is the section width, not the measured tread width. Choose a compatible wheel and offset for a spacer-free fit; spacers are not an automatic remedy for fouling. Confirm brake clearance, load and speed ratings and the exact vehicle application before fitting.

Results compare nominal sizes. They do not confirm vehicle or wheel fitment.

Other Bmw X1 Vehicle Information