Hyundai i10 Tyre Size Converter - Quick Results
Tyre Size Converter - Quick Results
Using one of the standard fitment sizes listed for the Hyundai i10, we have selected 195/45R16 to get you started. If your vehicle has a different size, enter the size shown on your tyre sidewall below to compare alternatives, wheel sizes and circumference differences.
Enter your tyre size to see the closest diameter match for each available rim size. Same or larger rims, with no narrower tyres.
Closest tyre size matches
2 closest recorded alternatives for 195/45R16, within ±3% circumference. Same or larger rims; tyre width 195 mm or wider.
17-inch rim
195/40R17✓ +1.01%Same tyre widthCompareHyundai i10 tyre size conversion explained
For your i10, changing from your selected 195/45R16 tyre on 16-inch wheels to 195/40R17 on 17-inch wheels gives a circumference increase of 1.01%. Nominal tyre width stays the same at 195 mm. With 195/40R17, indicated speeds of 30 and 60 mph correspond to approximately 30.3 and 60.6 mph respectively, assuming the speedometer was accurate with your selected original size.
Choosing a wheel size increase for your Hyundai i10
Standard and original equipment sizes
Check the standard or original equipment tyre and wheel sizes approved for your exact engine and trim. A size recorded against this model may belong to another version. A genuine manufacturer wheel option still needs to match your vehicle; these calculated alternatives are close size matches, not confirmation of manufacturer approval.
Speedometer variation and effective gearing
Keeping circumference close to your original tyre limits changes to speedometer and distance readings and effective gearing. A larger circumference makes gearing taller and increases road speed at the same wheel speed; a smaller circumference makes gearing shorter. The gearbox ratios themselves do not change. The estimates above assume the speedometer was accurate with your selected original tyre; existing speedometer error and actual rolling circumference can change the result. The ±3% filter is this converter’s comparison threshold, not a manufacturer approval or a guarantee of fitment.
More wheel, less sidewall
A larger wheel paired with a lower-profile tyre can give your i10 a sleeker, sportier appearance while keeping overall diameter close to the original. A shorter sidewall can also mean a firmer ride and less cushioning over potholes.
Tyre width, offset and full-lock clearance
Keep width increases modest and check clearance around the suspension and inner wheel arches at full steering lock and through suspension travel. Tyre width, wheel width and offset all affect whether a wheel fits without rubbing. Nominal tyre width is the section width, not the measured tread width. Choose a compatible wheel and offset for a spacer-free fit; spacers are not an automatic remedy for fouling. Confirm brake clearance, load and speed ratings and the exact vehicle application before fitting.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.