Vauxhall Corsa F 2019 Tyre Size Converter - Wheel View
Tyre Size Converter - Wheel View
Side view comparison
Tread view comparison
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Vauxhall Corsa F wheel fitment and alloy wheel options
Compare the wheel and tyre proportions above, then check the mounting details for your Vauxhall Corsa F 2019. Match the application to your engine and trim; wheel diameter alone does not determine whether an alloy wheel fits. The saved applications below remain tied to this vehicle selection when you change the preview tyre sizes.
PCD and centre bore
Recorded bolt pattern: 4 x 108 mm. Recorded centre bore (mm): 65.1 mm.
Wheel offset (ET)
Recorded offset (ET mm): ET38 mm. Offset describes the mounting face position relative to the wheel centreline. Read front and rear values separately; individual listed offsets do not define a universal minimum-to-maximum range.
Rim width and diameter
Recorded wheel width / diameter varies across the saved applications. Check the matching tyre, engine and variant in the recorded wheel details below. A larger diameter can provide a different visual balance, but wheel width and offset also determine inner and outer clearance. The drawings compare nominal tyre dimensions; they do not simulate spoke or brake clearance.
Wheel fixings and fitting checks
Recorded wheel fixings: 4 wheel bolts per wheel; M12 x 1.25. Use the specified fixing seat and tightening torque for the actual application. Check wheel load capacity, brake and hub clearance, and TPMS or valve requirements before fitting.
View recorded wheel details for your Vauxhall Corsa F
Match the application scope, variant and listed tyre size. A blank field is shown as not recorded; changing the preview does not create an approved fitment.
| Specification | Application 1 | Application 2 |
|---|---|---|
| Application scope | Corsa F type U petrol/diesel 55–96 kW original alloy application. Selected year 2019. Does not transfer electric Corsa-e ET32 or pressure/load values. For 2019 confirm late-year Corsa F; for 2023 confirm pre-facelift. | Corsa F type U petrol/diesel 55–96 kW original alloy application. Selected year 2019. Does not transfer electric Corsa-e ET32 or pressure/load values. For 2019 confirm late-year Corsa F; for 2023 confirm pre-facelift. |
| Variant | U | U |
| Listed tyre size | 195/55R16 | 205/45R17 |
| Confirmed front tyre | 195/55R16 | 205/45R17 |
| Confirmed rear tyre | 195/55R16 | 205/45R17 |
| PCD (bolt pattern) | 4 x 108 mm | 4 x 108 mm |
| Centre bore (mm) | 65.1 mm | 65.1 mm |
| Front wheel width / diameter (in) | 6.5J x 16 | 7J x 17 |
| Rear wheel width / diameter (in) | 6.5J x 16 | 7J x 17 |
| Front offset (ET mm) | ET38 mm | ET38 mm |
| Rear offset (ET mm) | ET38 mm | ET38 mm |
| Offset range applicability | Individual original wheel combination only. A general acceptable aftermarket ET range has not been established; minimum and maximum remain unrecorded. | Individual original wheel combination only. A general acceptable aftermarket ET range has not been established; minimum and maximum remain unrecorded. |
| Wheel bolts / nuts and thread | 4 wheel bolts per wheel; M12 x 1.25 | 4 wheel bolts per wheel; M12 x 1.25 |
| Fixing seat / length | Original alloy application: flat-seat M12 x 1.25 x 36 mm bolts, 17 mm hex. Confirm correct hardware for the exact wheel; steel-wheel bolts differ. | Original alloy application: flat-seat M12 x 1.25 x 36 mm bolts, 17 mm hex. Confirm correct hardware for the exact wheel; steel-wheel bolts differ. |
| Listed wheel torque (Nm) | 115 | 115 |
| Axle loads / wheel load requirement | Check the vehicle identification plate for permitted front and rear axle loads and the selected wheel load rating; model-wide minimum load not verified. | Check the vehicle identification plate for permitted front and rear axle loads and the selected wheel load rating; model-wide minimum load not verified. |
| Brake clearance | Exact engine/brake-package clearance and minimum wheel diameter must be checked for the selected wheel. | Exact engine/brake-package clearance and minimum wheel diameter must be checked for the selected wheel. |
| Hub / centre-cap clearance | 65.1 mm vehicle hub; product-specific hub protrusion and centre-cap clearance remain unverified. | 65.1 mm vehicle hub; product-specific hub protrusion and centre-cap clearance remain unverified. |
| Tyre load / speed requirements | Match the vehicle tyre label and CoC for the exact engine and load; no universal load/speed index assigned. | Match the vehicle tyre label and CoC for the exact engine and load; no universal load/speed index assigned. |
| TPMS / valves | Indirect tyre-deflation detection based on rolling circumference. Initialise via the Info Display after pressure correction or wheel changes; driving completes calibration. No individual pressure-sensor matching procedure for this system. | Indirect tyre-deflation detection based on rolling circumference. Initialise via the Info Display after pressure correction or wheel changes; driving completes calibration. No individual pressure-sensor matching procedure for this system. |
| Fitting restrictions | Confirm exact vehicle, wheel part number, CoC, brake clearance and supplied fixings. No universal spacer, adapter or modification approval recorded. | Confirm exact vehicle, wheel part number, CoC, brake clearance and supplied fixings. No universal spacer, adapter or modification approval recorded. |
Keep tyre-width changes modest and check clearance at full steering lock and through suspension travel. Select a suitable wheel width and offset for a spacer-free fit; spacers are not an automatic solution to rubbing. PCD and centre bore matches alone do not confirm that an aftermarket wheel fits.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.