Peugeot 208 2019 Tyre Size Converter - Wheel View
Tyre Size Converter - Wheel View
Side view comparison
Tread view comparison
View recommended tyre size conversions
Diameter matches only: confirm approved sizes, wheel width, clearance, load and speed ratings before fitting. Vehicle-specific limits may be stricter.
Peugeot 208 wheel fitment and alloy wheel options
Compare the wheel and tyre proportions above, then check the mounting details for your Peugeot 208 2019. Match the application to your engine and trim; wheel diameter alone does not determine whether an alloy wheel fits. The saved applications below remain tied to this vehicle selection when you change the preview tyre sizes.
PCD and centre bore
Recorded bolt pattern: 4 x 108. Recorded centre bore (mm): 65.1.
Wheel offset (ET)
Recorded offset (ET mm): ET32 mm. Offset describes the mounting face position relative to the wheel centreline. Read front and rear values separately; individual listed offsets do not define a universal minimum-to-maximum range.
Rim width and diameter
Wheel width and diameter combinations are not recorded here. Confirm that the selected tyre is approved for the chosen rim width. A larger diameter can provide a different visual balance, but wheel width and offset also determine inner and outer clearance. The drawings compare nominal tyre dimensions; they do not simulate spoke or brake clearance.
Wheel fixings and fitting checks
Recorded wheel fixings: 4 wheel bolts per wheel; M12 x 1.25 thread. Use the specified fixing seat and tightening torque for the actual application. Check wheel load capacity, brake and hub clearance, and TPMS or valve requirements before fitting.
View recorded wheel details for your Peugeot 208
Match the application scope, variant and listed tyre size. A blank field is shown as not recorded; changing the preview does not create an approved fitment.
| Specification | Application 1 | Application 2 | Application 3 | Application 4 | Application 5 | Application 6 |
|---|---|---|---|---|---|---|
| Application scope | Second-generation 208 (P21 / type U), 2019. Shared hub and fixing information only; individual engine and trim not recorded. 2019 is a generation changeover; confirm the actual vehicle type. | Second-generation 208 (P21 / type U), 2019. Shared hub and fixing information only; individual engine and trim not recorded. 2019 is a generation changeover; confirm the actual vehicle type. | Second-generation 208 (P21 / type U), 2019. Shared hub and fixing information only; individual engine and trim not recorded. 2019 is a generation changeover; confirm the actual vehicle type. | Second-generation 208 (P21 / type U), 2019. Shared hub and fixing information only; individual engine and trim not recorded. 2019 is a generation changeover; confirm the actual vehicle type. | Second-generation 208 (P21 / type U), 2019. Shared hub and fixing information only; individual engine and trim not recorded. 2019 is a generation changeover; confirm the actual vehicle type. | Second-generation 208 (P21 / type U), 2019. Shared hub and fixing information only; individual engine and trim not recorded. 2019 is a generation changeover; confirm the actual vehicle type. |
| Variant | 208 II (P21 / U); confirm individual derivative | 208 II (P21 / U); confirm individual derivative | 208 II (P21 / U); confirm individual derivative | 208 II (P21 / U); confirm individual derivative | 208 II (P21 / U); confirm individual derivative | 208 II (P21 / U); confirm individual derivative |
| Listed tyre size | 185/65R15 | 195/55R16 | 205/45R17 | 205/45R17 | 185/65R15 | 195/55R16 |
| Confirmed front tyre | 185/65R15 | 195/55R16 | 205/45R17 | 205/45R17 | 185/65R15 | 195/55R16 |
| PCD (bolt pattern) | 4 x 108 | 4 x 108 | 4 x 108 | 4 x 108 | 4 x 108 | 4 x 108 |
| Centre bore (mm) | 65.1 | 65.1 | 65.1 | 65.1 | 65.1 | 65.1 |
| Front offset (ET mm) | ET32 mm | ET32 mm | ET32 mm | ET32 mm | ET32 mm | ET32 mm |
| Rear offset (ET mm) | ET32 mm | ET32 mm | ET32 mm | ET32 mm | ET32 mm | ET32 mm |
| Wheel bolts / nuts and thread | 4 wheel bolts per wheel; M12 x 1.25 thread | 4 wheel bolts per wheel; M12 x 1.25 thread | 4 wheel bolts per wheel; M12 x 1.25 thread | 4 wheel bolts per wheel; M12 x 1.25 thread | 4 wheel bolts per wheel; M12 x 1.25 thread | 4 wheel bolts per wheel; M12 x 1.25 thread |
| Fixing seat / length | OE alloy uses washer-seat hardware. OE steel or space-saver spare wheel uses the bolt conical contact surface. Aftermarket seat and bolt length must match the actual wheel; no universal length specified. | OE alloy uses washer-seat hardware. OE steel or space-saver spare wheel uses the bolt conical contact surface. Aftermarket seat and bolt length must match the actual wheel; no universal length specified. | OE alloy uses washer-seat hardware. OE steel or space-saver spare wheel uses the bolt conical contact surface. Aftermarket seat and bolt length must match the actual wheel; no universal length specified. | OE alloy uses washer-seat hardware. OE steel or space-saver spare wheel uses the bolt conical contact surface. Aftermarket seat and bolt length must match the actual wheel; no universal length specified. | OE alloy uses washer-seat hardware. OE steel or space-saver spare wheel uses the bolt conical contact surface. Aftermarket seat and bolt length must match the actual wheel; no universal length specified. | OE alloy uses washer-seat hardware. OE steel or space-saver spare wheel uses the bolt conical contact surface. Aftermarket seat and bolt length must match the actual wheel; no universal length specified. |
| Listed wheel torque (Nm) | 100 | 100 | 100 | 115 | 115 | 115 |
| TPMS / valves | Indirect tyre-pressure monitoring using wheel-speed sensors; reinitialise after changing wheels or adjusting pressures. Confirm valve compatibility with the chosen rim. | Indirect tyre-pressure monitoring using wheel-speed sensors; reinitialise after changing wheels or adjusting pressures. Confirm valve compatibility with the chosen rim. | Indirect tyre-pressure monitoring using wheel-speed sensors; reinitialise after changing wheels or adjusting pressures. Confirm valve compatibility with the chosen rim. | Indirect tyre-pressure monitoring using wheel-speed sensors; reinitialise after changing wheels or adjusting pressures. Confirm valve compatibility with the chosen rim. | Indirect tyre-pressure monitoring using wheel-speed sensors; reinitialise after changing wheels or adjusting pressures. Confirm valve compatibility with the chosen rim. | Indirect tyre-pressure monitoring using wheel-speed sensors; reinitialise after changing wheels or adjusting pressures. Confirm valve compatibility with the chosen rim. |
| Fitting restrictions | Shared artwork and hub dimensions do not establish wheel compatibility. Confirm the exact engine, wheel application, axle loads and brake clearance. No spacer or adapter approval recorded. | Shared artwork and hub dimensions do not establish wheel compatibility. Confirm the exact engine, wheel application, axle loads and brake clearance. No spacer or adapter approval recorded. | Shared artwork and hub dimensions do not establish wheel compatibility. Confirm the exact engine, wheel application, axle loads and brake clearance. No spacer or adapter approval recorded. | Shared artwork and hub dimensions do not establish wheel compatibility. Confirm the exact engine, wheel application, axle loads and brake clearance. No spacer or adapter approval recorded. | Shared artwork and hub dimensions do not establish wheel compatibility. Confirm the exact engine, wheel application, axle loads and brake clearance. No spacer or adapter approval recorded. | Shared artwork and hub dimensions do not establish wheel compatibility. Confirm the exact engine, wheel application, axle loads and brake clearance. No spacer or adapter approval recorded. |
Keep tyre-width changes modest and check clearance at full steering lock and through suspension travel. Select a suitable wheel width and offset for a spacer-free fit; spacers are not an automatic solution to rubbing. PCD and centre bore matches alone do not confirm that an aftermarket wheel fits.
Results compare nominal sizes. They do not confirm vehicle or wheel fitment.